Rotational Kinetic Energy - Work-Kinetic Theorem

If a rigid body is rotating about a fixed axis with angular velocity $\omega$and a force is applied on it to increase its angular speed (and thus rotational kinetic energy), then the relation between the work done by the torque of the force and the change in its kinetic energy is predicted bywork-kinetic theorem for rotation.

According towork-kinetic theorem for rotation, the amount of work done by all the torques acting on a rigid body under a fixed axis rotation (pure rotation) equals the change in its rotational kinetic energy:

${W_\text{torque}} = \Delta K{E_\text{rotation}}.$

Work done by a torque can be calculated by taking an analogy from work done by force. Work done by force is calculated as the dot product of force and displacement of point of application of force. In case of angular motion, force is replaced by torque and linear displacement is replaced by angular displacement. Thus,
$W = \int_{}^{} {\vec \tau \cdot d\vec \theta }.$

Consider a rigid body, rotating freely about a fixed axis of rotation. Its initial angular speed is ${\omega_i}$. Suppose a force $F$is now applied (at a distance of $r$from the axis of rotation) to increase its angular speed. This force will produce a torque about the axis of rotation: $\vec \tau = \vec r \times \vec F.$From therotational form of Newton's second law, ${{\vec \tau }_\text{rot}} = {I_\text{rot}}\vec \alpha .$Here, ${I_\text{rot}}$is the moment of the body about the axis of rotation and $\α$is the angular acceleration produced in the body.

Also, thework done by torqueequals $W = \int_{}^{} {\tau \cdot d\theta } .$Angular acceleration changes the angular speed of the body and $α= \ \压裂{{d \ω}}{{dt}}。$Therefore, the work done by toque can be written as follows: $W = \int_{}^{} {{I_\text{rot}}\frac{{d\omega }}{{dt}}\cdot d\theta }.$Angular velocity is related to the rate of rotation of the body: $\omega = \frac{{d\theta }}{{dt}}.$
On calculating, one finds $W = \int_{{\omega _o}}^\omega {I_\text{rot} \omega \, d\omega } = \frac{1}{2}{I_\text{rot}}{\omega ^2} - \frac{1}{2}{I_\text{rot}}\omega _{^o}^2.$

Thus, the work done by the torque equals the change in rotational kinetic energy of the body.

A ring, a solid sphere and a thin disc of different masses rotate with the same kinetic energy. Equal constant torques are applied to stop them. Which will make the least number of rotations before coming to rest?

---

Work done by a constant torque is $W = \tau \theta$According to the work-kinetic theorem for rotation, work done by torque equals change in rotational kinetic energy
$W = \Delta K{E_\text{rot}}$ $\tau \theta = \Delta K{E_\text{rot}}$ $\theta = \frac{{\Delta K{E_\text{rot}}}}{\tau }$Since, the change in rotational kinetic energy and torque applied are equal, thus the angle rotated by all the objects are same.